NEW
  >   產品中心   >   正文

8E1+4GE PDH Multiplexer

8E1 + 4 GE Fiber Optical Multiplexer is a kind of fiber-optic communication device which can use fiber to transport 1~16 E1 signal in the meantime efficiently and can test the used E1 automatically. The flexible circuit test and the indication function has a simple single panel form, which provides 4 10M/100M/1000M Ethernet ports(optional) and a office phone port( optional), raising applied flexibility also in the meantime enlarge the utilization of the fiber optic.

Description


8E1+4GE PDH fiber optical Mux is a point-to-point optical transmission equipment developed based on ultra large scale integrated circuit. It has perfect alarm function, 1 channel digital service telephone and 4 channel GE Ethernet port. 8 channel Ethernet port set as switch and dividing VLAN as well. Ethernet transmission rate is 10/100/1000M auto adapted. The device's electronic part is total digital circuit, to assure working steady, low power consumption, high integration and easy maintain.

 

Character


(1) Based on self-independent knowledge circuit;

(2)Veneer design;

(2) Module style, wide dynamic detector;

(3) Optical module adopt send-receive synchronous way;

(4) Provide control remote alarm status;

(5) E1 interface accord with G.703, adopt digital clock reset and flat lock technique;

(6) Provide 8 channel E1 and 4 channel 1000M Ethernet transmission loading;

(7) 8 channel Ethernet port set as switch, also can be divided VLAN;

(8) Ethernet interface 10/100/1000M auto adapted;

(9) 1 channel PCM digital service telephone (for option);

(10) 2 channel RS232 for option;

(11) Support 1+1 fiber optical interface backup;(optional)

(12) Desktop device support independent SNMP, and link control (optional)

(13) Support detecting optical signal loss caused by remote device's turn off or fiber's break down;

(14) Inspect local device's temperature and voltage;

(15) Inspect remote device's temperature and voltage and set temperature alarming value;

(16) Transmission distance can reach 2~120km without relay;

(17) Multiple power supply type for option: AC220V,DC-48V/DC24V etc;

(18) DC48v/DC24v has no positive and negative difference;

(19) Head end support chassis with multiple cards, 12 channel optical way for option, SNMP included.

 

Parameter

  Fiber optical interface

  optical wavelength: 850/1310nm for multi-mode fiber, 1310/1550nm for single-mode fiber.

  optical interface: SC/FC/ST

  Fiber pinning: double and single for option

  transceiver module: >-6dBm

  optical receiver sensitivity<-36(BER<10-11 )

  receive range: >-30dB

  transmission distance: multi-mode 2 Km, single-mode 40 Km, single-mode 80 Km, single-mode 120 Km.

  Optical circuit coding: NRZ

 

  E1 interface  

  Interface Rate: 2.048Mbps+-50PPM

  Coding: HDB3

  Interface signal coding: ITU-T G.703

  E1 Interface: BNC 75Ω(unbalance), RJ45 120Ω(balance)

  Unbalanced coaxial cable connector: 75-2/3 coaxial cable adapted

  Interface character: match G.703

  Jitter tolerance: match G.742 and G.823.

  Input attenuation tolerance:0~6dBm

  

  Ethernet interface

  Interface Rate: 10/100/1000Mbps auto adapted, full/semi duplex auto adapted

  Interface character: match IEEE802.3, IEEE802.1 Q

  Mac address: can learn 4096 MAC addresses

  Connector: RJ45, Auto-MDIX

 

Dimension

485 mmL×140 mmW× 44 mmH

 

Power supply

AC220V: input voltage AC 180V260V

DC-48V: input voltage -36V-72V

 

Operation Condition

Voltage: AC180V ~ 260V; DC –48V; DC +24V

Consumption: ≤5W

Operating temperature: 0°C~50°C

Storing temperature: -40°C~+70°C

Relative humidity: 95 %

Without disturbance of erosive and solvent gas, raising dust or strong magnetic field


平码三中三论坛高手